FUJIPLA

HLA-2301

Fully automatic laminator that operates like a copy madhine.

Laminating Speed
0.5–2.1m/min *1
Warm-Up Time
Approx.6minutes 30seconds *2
Temperature Range
80–130℃
Feed Tray Capacity
Approx.200sheets (64g/m2 copying paper)
Max. Laminating Thickness
0.5mm (including film thickness)
Supported Films
HLA dedicated films (38µm • 75µm • 100µm • 125µm)
Supported Paper Thickness
0.07–0.25mm (70–250µm) • 64–209g/m2
Supported Paper
  • Copy paper
  • Coated paper
  • Matte paper
  • Art paper
*something excluded
Supported Paper Size
A5 • A4 • A3 • B5 • B4 • SRA4 • SRA3 • Digital • Letter • Half letter
Maximum Paper Size
330(W)×500(L)mm *3
Minimum Paper Size
182(W)×148(L)mm
Margin
Cutting Position Adjustable (Front:-30–+25mm / Rear:-25–+30mm)*4 *5
Trimming
Slitter Position Adjustable (Inside 3mm / Outside 3mm*4 )
Power Supply Voltage
AC100–240V (50/60Hz)
Power Consumption
1200W
Body Size
912(W)×590(D)×1149(H)mm (Assembled)
1327(W)×590(D)×1149(H)mm (Maximum Assembled Size with extension tray)
Body Weight
77kg (Assembled) (Body:52kg、Stand:25kg)
Accessories
  • Feeder
  • Tray Extension Tray
  • Rear Stacker Tray
  • Power Cord
  • Instruction manual
  • Waste collection Box
  • Stand
  • Note : Corners are cut square.
  • *1 Speed may differ according to paper and films. (The processing speed in single-cut mode and long mode is fixed at 1m/min.)
  • *2 Warm-up time may differ according to the enviroment.
  • *3 Long Mode is exceptional. If you add margins to the film, tha maximum width of the paper is 297mm.
  • *4 Margin and Trimming is accurate to within ±0.5mm. (In single-cut mode, the margin and trimming accuracy will be greater than ±0.5mm.)
  • *5 When the single cut mode is selected, it is not possible to set 0 or a smaller value to both the front and back margins.

TOP